MagicPlast Ready Mix -220 is a polymer-modified premixed cement base plaster, which is suitable for both inner as well as outer walls. Convenient, easy-to-use, stronger and developed to bind better to its substrate, it provides an even surface to ensure faster and efficient tilling.
Ideal for application on brick, stone, AAC/concrete block and concrete surface, it scores over the conventional plaster in terms of application time, quality, shrinkage cracks, handling and storage, and wastage.
Here’s how you can use it to plaster your walls with ease.
Step 1: Clean the application area
Make sure that the wall to be plaster is rigid, and wipe out oil, grease, paint, loose plaster and dust particles from its surface.
Step 2: Dampen the wall
For better results, wet the wall to be plastered in advance.
Step 3: Prepare the plaster as directed
Take 6-7 liters of water in a bucket and add 1 bag (40 kg) of Magicplast 220, and mix it by hand. Alternatively, you can use an electrical or mechanical stirrer. Mixing should be done for 5-10 minutes based on the speed of the mixing equipment. Leave the mix to slake for 5-10 minutes and remix before use.
Step 4: Apply the mixture quickly
The mixture should be applied within one hour of preparation. When applying on concrete, make sure that the surface is rough. In normal weather, Magicplast doesn’t need watering for 24 hours. Curing should be done 2-3 times for 2-3 days once the plaster is completely dry. In abnormal weather conditions, curing for 5-7 days is required.