MagicPlast: Ready Mix Plaster by Magicrete



Magicplast Readymix Plaster & Concrete

AAC BLOCKS MANUFACTURER & SUPPLIER IN INDIA MagicPlast is a Ready-Mix Plaster offered by Magicrete Building Solutions. It is a leading company offering ready made plaster for walls in India. This polymer modified premixed cement-based plaster is easy to work with and binds better to its substrate.

Its application provides an even and strong base surface for fast and efficient tiling. This ready to use mixture has some water-retaining components which reduces the curing requirement of the plaster, when compared to other conventional method.


Magicbox(AAC Blocks) MagicPlast, a ready mix cement plaster is strong binder and is compact, all thanks to the specially articulated graded sand in it. In addition to this, presence of special polymers also reduces the re-bonding losses and enhances the productivity. Its greater compactness and strength give substantial reduction in repairs and maintenance costs, while also enhancing life of the wall.

The ready-mix plaster of Magicrete Building Solutions, MagicPlast is also available in the special “Spray Plaster Machine Application” variant which makes it even more easy to use. So, hurry up and order it from the website of the leading ready mix plaster manufacturers i.e. Magicrete Building Solutions.


Important Features of MagicPlast:

  1. Excellent Coverage: Because of the lower density and high spread volume, it can cover from 18-20 sq. Ft. per bag that too with a thickness of 10-12mm.

  1. Economical: Even a single coat can provide smoothly finished walls thus saving time as well as money required for putty coating.

  1. High Strength: The ready-mix plaster manufactured by Magicrete Building Solutions offers high degree of compressive and tensile strength which increases the overall masonry strength and the load-bearing capacity of the structure.

  1. Faster Application: Since MagicPlast is pre-mixed product and only water has to be added on site, the logistical complexity is highly reduced.

  1. Saves Water: Water consumption during construction is less as compared to traditional plaster.

  1. The specially added polymers restrict shrinkage cracks in the mortar, thereby keeping walls crack-free.


Health & Safety Precaution To be taken While Using of MagicPlast:

  • This product is meant only for external use.
  • Clean tools & hands with soap water after use.
  • Wear protective clothing such as gloves and goggles while using this product.

Technical Specifications of MagicPlast

PARAMETERS

SPECIFICATIONS

Appearance

Greyish Granular Powder

Main Binder

Portland cement

Maximum Aggregate Size

Less than 3.5 mm

Bulk Density

1.5- 1.6 Kg/litre unit

Compressive Strength (MPa)

More than 9 in 28 days

Water Retentivity

Min 95% (EN 1015-8)

Flexural Strength

Min 1.8 Mpa in 28 days


Parameters Specifications of MagicPlast

Coverage                           18 - 20 sqft/40 kg bag (for 10 - 12mm thickness)

Thickness of Layer              6 - 12 mm

Pot Life                              1.5 - 2 hours

Proportion of Water (%)      17 - 19% as per weight

*Specifications may vary, due to continuous product development

Preparation & Application of MagicPlast:

PREPARATION –

  1. The application surface on which the mixture is applied should be rigid, and should be free from oil, grease, paint, loose plaster or any other kind of dirt particles. Dampen the wall properly before application of plaster.

  1. Pour 6 to 7 liters of potable water in a clean container and then add 1 bag (40 kg) of MagicPlast Ready Mix Plaster to it.

  1. Although the mixture can be mixed by hand but use of mechanical mixer or electrical stirrer is recommended for getting better results.

  1. Mix it for 5- 10 minutes depending upon the speed of the mixing equipment you are using.

  1. Finally, let the mix slake for 5- 10 min and remix it before use.


APPLICATION –

The mixture will be applied within one hour of preparation. If the concrete surface is too smooth and dense, it is suggested to make it rough so that the plaster layer can stick better.

In the normal weather, MagicPlast Ready Mix Plaster doesn't require watering for the first 24 hours. However, after the plaster is completely dry, curing should be done 2 - 3 times for 2 - 3 days. In abnormal weather conditions, curing for 5-7 days is required.