For greater bond strength and durability, look no further than MagicBond Block Jointing Mortar. Trusted by developers around India, it can be used for both interior and exterior purposes.
MagicBond – Block Joining Mortar is a high strength adhesive for quick and firm laying of AAC blocks with thin joints. Made of cement, graded sand, and blended with polymers, it provides high strength and water retention properties even when in the thickness of 2-3 mm layer.
With improved compressive and tensile strength, it offers better value for money compared to other products. MagicBond meets ASTM-C1660-09 quality standards.
98% of AAC Fly Ash Blocks worldwide are joined using thin-bed mortar.
High load bearing capacity and increased masonry strength are the hallmarks of MagicBond AAC Block Jointing Mortar. The special polymer it contains imparts high adhesive strength of >0.41 MPa.
MagicBond AAC Block Jointing Mortar prevents seepage and water percolation during and after application avoiding shrinkage cracks and allowing better leveling.
Compared to conventional mortar, the amount of MagicBond required is up to 3 times lesser. This speeds up the time needed for laying blocks and also reduces the overall costs.
Due to its low density and higher volume, a 40 kg bag of MagicBond covers 170-180 sq. ft with a thickness of 3mm. It is an AAC Block adhesive that has also has a high level of consistency and quality.
MagicBond contains advanced water retention polymers which do not require curing after being applied, saving water.
MagicBond is a ready to use mortar mix, all that it needs is a minimal amount of water. Onsite preparation time required is minimal compared to regular mortar.
Thin joints regulate the transfer of heat through walls.
It is easy to mix and can be applied quickly. This not only saves time but also manpower.
|Pot Life||~1.5 - 2 hrs|
|Tensile Adhesive Strength||>0.41 MPa (as per ASTM - C1660)|
|Coverage||170 - 180 sq.ft (for 4" thick blocks)|