3X Tile Bonder, from the house of Magicrete, is an on-site mix that strengthens the cement and improves its workability. Its high water retention capacity lends 3X Tile Bonder excellent bonding properties, thereby making it sag-resistant and enhancing workability. Also, reduced setting time than usual makes it the ideal economical additive that is to be mixed with cement for fixing tiles.
3X Tile Bonder can be used with both white and grey cement.
Where can 3X Tile Bonder be applied?
3X Tile Bonder can be mixed with sand and cement and is ideal for installing tiles – both ceramic and vitrified – on leveling the bed and standard cement machan.
On-site mix for tile fixing
Packaging Size: 300 g pouch
Owing to the higher water retention property, the Magicrete 3X Tile Bonder provides three times stronger bonding strength and better adhesion. The tensile adhesion strength of Magicrete 3X Tile Bonder after 28 days is more than 0.5 N/mm square.
The higher water retention property also means that Magicrete 3X Tile Bonder has sag resistance capability and therefore, improves workability, and reduces the setting time for the tiles. Also, it entails better adjustability of tiles due to better adhesion.
Magicrete 3X Tile Bonder is an economical onsite mix additive that entails zero wastage. It has a high shelf life of 12 months which means that it can be used for quite a long time if stored in a cool and dry place.
Magicrete 3X Tile Bonder has a high adjustability time, which is good even at low dosages and high ambient. Therefore, it leaves no shrinkage cracks on or between the tiles.
Magicrete 3X Bonder is sag resistant, thereby allowing it more workability and open time, thus allowing it to stay in place on the applied surface and not drip down the surface.
In comparison to conventional mortar, Magicrete 3X Tile Bonder allows more time for adjusting the tiles after fixing them without impacting their adhesive properties.
|Pot Life||> 10 mins.|
|Open Time||> 5 mins.|
|Tensile Adhesion Strength at 28 days||≥ 0.5 N/mm2|
|Shear Adhesion Strength at 28 days||≥ 1.0 N/mm2|
|Coverage||2.0 - 2.5 sq. ft.|