3X Tile Bonder

3X Tile Bonder is made from a blend of high-grade cement, carefully selected aggregates, and advanced polymer additives to ensure superior bonding and flexibility.

The product specifications include high compressive strength, excellent adhesion properties, and a long open time for adjustments. It is suitable for both interior and exterior tile installations.

3X Tile Bonder is available in 20 kg bags, making it convenient for various project sizes.

Benefits include enhanced adhesion strength, resistance to shrinkage and cracking, and suitability for a wide range of tile types, including ceramic, porcelain, and natural stone.

• Use clean, cold water for mixing the adhesive.

• Allow the mixed adhesive to rest for about 5 minutes and then remix before application.

• Ensure uniform adhesive coverage on the substrate by using a notched trowel at a consistent angle.

• Regularly check for adhesive coverage on the back of tiles during installation.

To use 3X Tile Bonder, follow these steps:

• Surface Preparation: Ensure the surface is clean, dry, and free from dust, grease, or any loose particles.

• Mixing: Add the 3X Tile Bonder powder to clean water in a bucket and mix thoroughly until a uniform, lump-free paste is achieved. Follow the recommended water-to-adhesive ratio provided on the packaging.

• Application: Use a notched trowel to spread the adhesive evenly on the substrate.

• Tile Placement: Place the tiles onto the adhesive bed, pressing firmly and evenly to ensure proper adhesion. Use tile spacers to maintain consistent gaps between tiles.

• Adjustments: Make any necessary adjustments to the tile placement within the adhesive’s open time.

• Curing: Allow the adhesive to cure for the specified time before grouting or exposing to traffic.

• Notched trowel (appropriate size for tile size)

• Mixing bucket and mixing paddle

• Tile spacers

• Rubber mallet

• Tile cutter or wet saw

• Level and straightedge

• Sponge and clean water for cleaning excess adhesive

Typically, you should wait 24 hours before grouting to allow the adhesive to cure properly. However, always refer to the specific product instructions for accurate curing times.

You can contact Magicrete customer service for 3X Tile Bonder by calling the customer service number provided on their website. Additionally, you can send an email to their customer support address at info@magicrete.in 

Yes, Magicrete provides technical assistance for using 3X Tile Bonder. You can contact their customer service team for expert advice on proper usage, mixing ratios, and application techniques.

Detailed product information and specifications for 3X Tile Bonder can be found on the Magicrete website. 

Yes, 3X Tile Bonder is suitable for both indoor and outdoor applications. However, for outdoor applications, ensure that the surface is well-prepared and that the adhesive is applied according to the manufacturer's instructions to withstand varying weather conditions.

Maintain the applied tiles by regularly cleaning them with a mild detergent and water. Avoid using harsh chemicals or abrasive cleaning tools that can damage the tiles and weaken the adhesive bond.

If the adhesive becomes thick, avoid adding water or other substances to thin it out, as this can compromise its performance. Instead, ensure it is stored correctly to prevent thickening. If necessary, consult Magicrete customer service for advice.

When using 3X Tile Bonder in wet areas like bathrooms or kitchens, ensure that the substrate is properly waterproofed and that the adhesive is applied according to the manufacturer's guidelines to prevent water infiltration and ensure long-lasting performance.