Elite (Grey/White)

Elite (Grey/White) Tile Adhesive is formulated with high-quality cement, selected aggregates, and special additives. These materials ensure superior bonding strength, flexibility, and durability for various tile installation applications.

• Type: Cementitious tile adhesive

• Form: Powder

• Color: Available in grey and white variants

• Mixing Ratio: Approximately 3 parts powder to 1 part water by weight

• Open Time: 20-30 minutes

• Adjustability Time: 10-15 minutes

• Shelf Life: 6 months from the date of manufacture when stored in a cool, dry place

Elite (Grey/White) Tile Adhesive is available in 20 kg bags, suitable for both small and large-scale tiling projects.

Elite (Grey/White) Tile Adhesive offers excellent adhesion and flexibility, making it ideal for both wall and floor tile installations. Its superior bonding strength ensures long-lasting durability and reduces the risk of tile displacement.

• Surface Preparation: Ensure the surface is clean, dry, and free from dust, grease, or any loose particles. Repair any cracks or holes.

• Mixing: Mix Elite Tile Adhesive powder with clean water in a clean container. The recommended ratio is usually mentioned on the product packaging. Mix until a smooth, lump-free paste is achieved.

• Application: Apply the adhesive to the substrate using a notched trowel. Spread the adhesive evenly to cover an area that can be tiled within 10-15 minutes.

• Tile Placement: Place the tiles firmly onto the adhesive bed and press them gently. Use spacers to maintain consistent gaps between tiles.

• Adjustment: Adjust the tiles within 10-15 minutes if necessary.

• Curing: Allow the adhesive to cure for at least 24 hours before grouting or exposing the tiles to traffic.

• Use clean, cold water for mixing the adhesive.

• Allow the mixed adhesive to rest for 5 minutes, then remix before application.

• Apply the adhesive in small sections to maintain its workability.

• Ensure consistent pressure when placing tiles to avoid uneven surfaces.

• Regularly check for adhesive coverage on the back of tiles during installation.

• Incorrect Mixing: Not following the recommended water-to-adhesive ratio can weaken the bond.

• Inadequate Surface Preparation: Not cleaning or repairing the substrate can lead to poor adhesion.

• Applying Too Much Adhesive: Excess adhesive can cause tiles to slide and result in an uneven surface.

• Not Using Spacers: This can lead to inconsistent gaps and alignment issues.

• Rushing the Curing Process: Not allowing sufficient curing time can compromise the strength of the installation.

• Use a notched trowel to ensure even spreading of the adhesive.

• Mix the adhesive in small batches to prevent it from drying out before use.

• Ensure proper alignment and spacing of tiles using spacers.

• Work in small sections to maintain the adhesive's workability.

• Clean any excess adhesive from the tile surface immediately.

You can contact Magicrete customer service for Elite (Grey/White) Tile Adhesive by calling the customer service  number on 8070408010. Additionally, you can send an email to their customer support address info@magicrete.in

Detailed product information and specifications for Elite (Grey/White) Tile Adhesive can be found on the Magicrete website.

If you encounter any issues with Elite (Grey/White) Tile Adhesive, you should contact the Magicrete customer service team for assistance. They will guide you through troubleshooting steps and provide solutions to resolve the problem effectively.

To clean tiles installed with Elite (Grey/White) Tile Adhesive, use a mild detergent and water solution. Avoid using abrasive cleaners or harsh chemicals, as these can damage the tile surface and the adhesive.

It is recommended to inspect tiles installed with Elite (Grey/White) Tile Adhesive at least once every six months. Look for any signs of damage, such as cracks or loose tiles, and address any issues promptly to maintain the integrity of the installation.

If you notice a tile becoming loose, remove the tile carefully and clean the substrate. Reapply Elite (Grey/White) Tile Adhesive and set the tile back in place. Allow the adhesive to cure as per the manufacturer's instructions before using the area.

Avoid using abrasive cleaning tools, such as metal scrubbers, and harsh chemicals that can damage the tiles and the adhesive. Also, avoid dragging heavy objects across the tiled surface to prevent scratches and damage.