Power Mesh

Magicrete Power Mesh is utilized as bed joint reinforcement in horizontal AAC masonry joints, enhancing wall stability, reducing thermal cracks, and increasing flexural strength.

The mesh is made from a fabric that weighs 350 GSM, providing durability and resistance to stress.

The mesh size is 5mm x 5mm, ideal for effective reinforcement in building constructions.

The standard roll lengths are 25 meters, with a tolerance of 1%, and widths available in 50mm, 75mm, and 100mm.

Both the warp and weft have a breaking strength of 3200 N/mm², ensuring high tensile strength.

The mesh increases tensile and flexural strength, enhances bonding between AAC blocks and mortar, and helps control cracks, leading to more durable and stable constructions.

Yes, the mesh is designed for easy workability, simplifying the handling and installation process during construction.

By increasing the longevity and performance of AAC blocks, it reduces maintenance and repair costs, making it a cost-effective solution for building projects.

Store Power Mesh away from continuous water contact. Ensure it's dry before use, and stack layers alternately every 3-4 layers to avoid corner chipping, with stacking height not exceeding 1.2/1.5 meters.

Use a minimum block thickness of 100 mm for internal walls and 150-200 mm for external walls. Plan the layout and count the blocks beforehand, and moisten blocks with a wet brush 24 hours before masonry.

For AAC masonry, either traditional mortar or specially formulated thin bed mortar can be used. For traditional mortar, maintain a 1:6 Cement: Sand ratio, and apply it at 10mm to 15mm thickness for flexibility.

Avoid soaking blocks; instead, moisten them with a wet brush. Start with corner blocks first and check uniformity with a level-o-meter. Ensure at least a 1/3rd overlap in masonry patterns.

Unlike traditional masonry, AAC blocks require curing only at the traditional mortar joints for up to 7 days, twice daily using a nozzle sprayer to ensure sufficient moisture for the mortar.

Install bond beams every 1200 mm (or every 5-6 layers) with 2 TMT bars of 8 mm diameter and a 6 mm diameter stirrup, ensuring the rods extend at least 60 mm around columns.

Seal these joints using polyurethane foam or lean mortar and leave 10-20 mm gaps at the wall's top, which are filled after 2 weeks to prevent cracks from structural deformation.

Isolate contact surfaces using lean mortar or PU foam before plastering and apply chicken mesh or fibre mesh at critical points like door and window corners to prevent plaster cracks.

You can reach Magicrete customer service via email at info@magicrete.in or by calling their phone number at 8070408010.

Magicrete's customer service hours aren't explicitly listed on their website. For specific hours, it's best to call or email them directly.

The corporate office is located at 101-102, Ritz Square, Near Narmad Library, Ghod Dod Road, Surat-395001, Gujarat, India.

Yes, they have a regional office in the West located at Unit No. 401, 4th Floor, Sunil Enclave, Pereira Hill Road, Andheri Kurla Road, Andheri East, Mumbai 400099, and in the North at K 2/3, Second Floor, Behind Central Arcade market, M.G Road, DLF City Phase–2, Gurgaon, Haryana-122002.

Yes, feedback or suggestions can be submitted through their 'Contact Us' page on the Magicrete website.

Yes, Magicrete has a dedicated call center for handling customer complaints, ensuring prompt and efficient service.

You can visit Magicrete's official website or contact their customer service for detailed information on their products and services.

Store Power Mesh in a dry environment to prevent any potential moisture damage before installation.

Yes, Power Mesh is compatible with all types of AAC blocks, enhancing their strength and stability.

Regularly inspect for any signs of displacement or damage, especially in high-stress areas.

Ensure that Power Mesh is properly aligned and embedded within the mortar joints to maintain its effectiveness.

Handle with care to avoid bending or kinking the mesh, which can diminish its structural properties.

Use a layering technique, ensuring that each mesh layer is fully covered with mortar to secure its position and function.

Power Mesh is designed to withstand environmental exposures typical to building interiors; however, it should be protected from extreme conditions during storage.

Structures utilizing Power Mesh should undergo periodic structural assessments to ensure ongoing integrity and performance.