EG-200 (Epoxy Tile Grout 2K)

Epoxy Tile Grout EG-200 is made from a two-part epoxy system that includes an epoxy resin and a hardener. This combination provides excellent strength, durability, and resistance to water and chemicals.

• Type: Two-component epoxy grout

• Components: Epoxy resin and hardener

• Color: Available in a variety of colors to suit different tile designs

• Mixing Ratio: Typically 1:1 by weight, as specified by the manufacturer

• Coverage: Varies based on tile size and joint width; generally around 0.2-0.3 kg per sq. m for standard tiles

• Pot Life: Approximately 45-60 minutes

• Curing Time: Initial set in 24 hours, full cure in 7 days

• Shelf Life: 12 months from the date of manufacture when stored in a cool, dry place

Epoxy Tile Grout EG-200 is available in 5 kg bucket

Epoxy Tile Grout EG-200 offers superior bonding strength, excellent chemical resistance, and high water resistance, making it suitable for areas exposed to moisture, chemicals, or heavy traffic. It also provides consistent color and is highly stain-resistant.

To use Epoxy Tile Grout EG-200, follow these steps:

• Surface Preparation: Ensure the tile joints are clean, dry, and free from dust, grease, or other contaminants.

• Mixing: Combine the epoxy resin and hardener according to the manufacturer's instructions. Mix thoroughly until a uniform consistency is achieved.

• Application: Apply the grout to the joints using a rubber float, spreading it diagonally across the joints to ensure full coverage.

• Removing Excess Grout: Use the rubber float to remove excess grout from the tile surface by holding it at a 45-degree angle and moving it diagonally.

• Initial Cleaning: After 15-20 minutes, clean the tile surface with a damp sponge, making sure to rinse the sponge frequently.

• Final Cleaning: After the grout has set (approximately 24 hours), clean any remaining haze with a suitable cleaner and a soft cloth.

• Work in small sections to prevent the grout from setting too quickly.

• Use a rubber float to apply the grout and ensure it is pressed firmly into the joints.

• Clean the tile surface regularly during the application process to prevent grout haze.

• Ensure that the mixing ratio of the resin and hardener is accurate for optimal performance.

You should perform the initial cleaning 15-20 minutes after applying the grout to remove excess grout and prevent haze. The final cleaning should be done after the grout has fully set, typically 24 hours after application.

If the epoxy grout starts to set before you finish, it is best to discard the remaining grout and mix a new batch. Attempting to rehydrate or remix the partially set epoxy can compromise its performance and bonding strength.

Magicrete offers various support services for Epoxy Tile Grout EG-200, including product information, technical assistance, guidance on usage and application, troubleshooting, and after-sales support to address any issues or concerns.

Yes, Magicrete provides technical assistance for using Epoxy Tile Grout EG-200. You can contact their customer service team for expert advice on proper usage, mixing ratios, and application techniques.

To provide feedback or make a complaint about Epoxy Tile Grout EG-200, you can contact the Magicrete customer service team via phone at 8070408010 or email at info@magicrete.in. They value customer feedback and will address your concerns promptly to ensure your satisfaction.

To clean Epoxy Tile Grout EG-200, use a mild detergent mixed with water and a soft-bristle brush or sponge. Avoid using harsh chemicals or abrasive tools that can damage the grout surface. Regular cleaning helps maintain its appearance and performance.

It is not recommended to use bleach or acidic cleaners on Epoxy Tile Grout EG-200, as they can damage the grout and reduce its longevity. Stick to pH-neutral cleaners specifically designed for epoxy grout.

To prevent staining, promptly clean up spills, especially from acidic or strongly colored substances like wine, coffee, or fruit juices. Regularly clean the grout to remove dirt and residues that can lead to staining.

To maintain the color and finish of Epoxy Tile Grout EG-200, avoid using harsh chemicals or abrasive cleaning tools. Regularly clean the grout with mild, pH-neutral cleaners and promptly address any spills. This will help preserve the grout's original color and finish for a longer period.