Standard+ (Grey/White)

Standard+ (Grey/White) tile adhesive is formulated using high-quality cement, fine aggregates, and special additives to ensure strong bonding, flexibility, and durability. It is designed to provide excellent adhesion for various types of tiles on different substrates.

Standard+ (Grey/White) tile adhesive features high bonding strength, water resistance, and flexibility. It is suitable for both internal and external applications and can be used on walls and floors. The adhesive complies with relevant industry standards for performance and quality.

Standard+ (Grey/White) tile adhesive is available in 20 kg bags, making it convenient for handling and application on various project sizes, from small residential renovations to larger commercial installations.

Yes, Standard+ (Grey/White) tile adhesive is versatile and can be used for both wall and floor applications. It provides excellent adhesion and durability in both vertical and horizontal installations.

Yes, Standard+ (Grey/White) tile adhesive is designed to be water-resistant, making it suitable for use in wet areas such as bathrooms, kitchens, and swimming pools. It ensures long-lasting adhesion even in moist conditions.

Standard+ (Grey/White) tile adhesive is suitable for installing a wide range of tiles, including ceramic, vitrified, porcelain, and natural stone tiles. Its strong bonding properties make it ideal for various tile types and sizes.

The coverage of a 20 kg bag of Standard+ (Grey/White) tile adhesive depends on the size of the tiles and the thickness of the adhesive layer. On average, it can cover approximately 4-5 square meters for a 3 mm thick layer.

• Surface Preparation: Ensure the substrate is clean, dry, and free from grease, oil, or loose particles.

• Mixing Adhesive: Mix Standard+ (Grey/White) tile adhesive with clean water in a ratio of 3:1 (powder to water) until a lump-free paste is formed.

• Application: Spread the adhesive on the substrate using a notched trowel, applying enough to cover an area that can be tiled within 10-15 minutes.

• Fixing Tiles: Press tiles firmly into the adhesive bed, ensuring full contact with no air gaps.

• Alignment: Adjust the tiles within the open time (20-30 minutes) to ensure proper alignment and spacing.

• Curing: Allow the adhesive to cure for at least 24 hours before grouting.

• Consistent Mixing: Always mix the adhesive to a consistent, smooth paste to avoid lumps.

• Appropriate Trowel Size: Use the correct notched trowel size to ensure adequate adhesive coverage.

• Avoid Overlapping: Do not spread adhesive over large areas at once; work in manageable sections.

• Tile Placement: Press tiles firmly into the adhesive and use spacers for uniform joints.

• Check Alignment: Frequently check tile alignment and adjust as necessary within the adhesive's open time.

• Clean Tools: Keep tools clean to avoid dried adhesive interfering with the application process.

• Improper Surface Preparation: Failing to clean and prepare the substrate can lead to poor adhesion.

• Incorrect Mixing Ratio: Using incorrect water-to-adhesive ratios can weaken the bond strength.

• Exceeding Open Time: Applying tiles after the adhesive has started to set can result in poor adhesion.

• Insufficient Coverage: Not applying enough adhesive can lead to hollow spots and weak bonding.

• Skipping Curing Time: Not allowing adequate curing time can compromise the integrity of the tile installation.

• Ignoring Environmental Conditions: Installing tiles in extreme temperatures or humidity without proper precautions can affect the adhesive performance.

• Clean Surface: Ensure the substrate is free from dust, grease, and loose 

• Dry Surface: The surface should be dry and free from moisture.

• Smooth Surface: Repair any cracks or holes and ensure the substrate is level.

• Priming: For highly absorbent surfaces, apply a primer to reduce absorption and improve adhesion.

Mix Standard+ (Grey/White) tile adhesive with clean water at a ratio of 3:1 (powder to water). Adjust as necessary to achieve a smooth, lump-free paste.

Allow the tiles to cure for at least 24 hours before applying grout. Avoid heavy traffic or stress on the tiles during this period to ensure proper bonding.

• Wear Protective Gear: Use gloves and safety glasses to protect your skin and eyes from the adhesive.

• Ventilation: Ensure proper ventilation in the working area to avoid inhaling dust or fumes.

• Clean Water: Use clean, potable water for mixing the adhesive.

• Proper Disposal: Dispose of any leftover adhesive and packaging materials according to local regulations to minimize environmental impact.

You can contact our customer service team via email at support@magicrete.in or by calling our toll-free number 8070408010

Our customer service team can assist you with product inquiries, installation guidance, troubleshooting issues, order tracking, and any other support related to Standard+ (Grey/White) tile adhesive.

Yes, our customer service includes technical support for installation-related queries. Our experts can guide you through the installation process and provide tips for achieving the best results.

You can track your order by logging into your account on our website and navigating to the 'Order History' section. Alternatively, you can contact our customer service team with your order number for assistance.

If you receive a damaged or incorrect product, please contact our customer service team immediately. We will arrange for a replacement or refund as per our return policy.

Use a pH-neutral cleaner and a soft cloth or mop to clean the tiles. Avoid using abrasive cleaners or tools that could damage the tile surface or the adhesive.

 Regular cleaning is recommended to maintain the appearance and longevity of your tiles. For high-traffic areas, clean once a week. For less frequently used areas, clean at least once a month.

Seal the grout lines after installation to prevent stains and discoloration. Reseal the grout lines every 6 to 12 months, depending on the area’s usage and exposure to moisture.

 Immediately replace any loose or cracked tiles to prevent further damage. Remove the damaged tile, clean the area, and apply fresh Standard+ adhesive before setting the new tile in place.

Avoid using acidic or alkaline cleaners, as they can damage the tile surface and the adhesive. Stick to pH-neutral cleaners to ensure the longevity of your installation.

Use felt pads or rubber coasters under furniture legs to prevent scratches and distribute weight evenly. For high-traffic areas, consider using rugs or mats to reduce wear and tear on the tiles and adhesive.

Regularly check for signs of damage or wear, especially after extreme weather conditions. Clean the tiles regularly, and reseal the grout lines every 6 months to prevent moisture infiltration and damage.

Clean the affected area with a mixture of water and mild detergent. Ensure the area is well-ventilated and dry. For persistent mold or mildew, use a specialized cleaner and consider resealing the grout to prevent future growth.