CG-100 (Unsanded Tile Grout)

Unsanded Tile Grout CG-100 is composed of high-quality cement, fine fillers, and special additives that enhance its bonding strength and durability. It does not contain sand, making it ideal for delicate tile surfaces.

Unsanded Tile Grout CG-100 is available in 1 kg pouch, suitable for both small and large tiling projects.

Unsanded Tile Grout CG-100 provides smooth, fine joints without scratching delicate tile surfaces. It offers excellent bonding strength and durability, making it suitable for use in areas with narrow grout joints.

Unsanded Tile Grout CG-100 is particularly suitable for Joint filling in floor & wall tiles for both internal & external applications.

• Mix small batches to avoid the grout drying out before application.

• Always follow the manufacturer's recommended water-to-grout ratio for mixing.

• Work in small sections to prevent the grout from setting on the tile surface before you can clean it off.

• Use a damp, not wet, sponge for initial cleaning to avoid washing out the grout from the joints.

• Perform a final clean with a dry cloth after the grout has fully cured to remove any haze.

• Overwatering the Mix: Adding too much water can weaken the grout and cause it to crack.

• Inadequate Cleaning: Not cleaning the tile surface soon enough can result in difficult-to-remove grout haze.

• Skipping the Slaking Step: Failing to let the grout rest after mixing can lead to poor performance and workability.

• Improper Joint Filling: Not pressing the grout firmly into the joints can leave voids and reduce the grout's durability.

Ensure the tiles are firmly set and the adhesive has fully cured. Clean the joints to remove any dust, debris, or adhesive residue. The joints should be uniformly deep and free from contaminants that could affect grout adhesion.

• Use clean, cool water for mixing.

• Allow the grout to slake for 5-10 minutes and then remix before application.

• Apply the grout at a consistent angle and pressure to ensure even filling of the joints.

• Clean the tile surface promptly and thoroughly after grouting to prevent haze.

• Protect the grouted area from water and heavy traffic for at least 24 hours to allow proper curing.

You can contact Magicrete customer service for Unsanded Tile Grout CG-100 by calling the customer service number at 8070408010

Magicrete offers various support services for Unsanded Tile Grout CG-100, including product information, technical assistance, guidance on usage and application, troubleshooting, and after-sales support to address any issues or concerns.

Yes, Magicrete provides technical assistance for using Unsanded Tile Grout CG-100. You can contact their customer service team for expert advice on proper usage, mixing ratios, and application techniques.

Regularly clean the grout lines with a pH-neutral cleaner and a soft brush to remove dirt and stains. Avoid using harsh chemicals or abrasive cleaners that can damage the grout and cause discoloration.

Clean spills immediately with a damp cloth or sponge to prevent staining. For stubborn stains, use a mild grout cleaner and a soft brush to gently scrub the affected area. Rinse thoroughly with clean water.

Avoid using acidic or bleach-based cleaners, as they can erode the grout and cause discoloration. Stick to pH-neutral cleaners specifically designed for grout maintenance.

To maintain the color of the grout Regular cleaning and sealing helps preserve the grout’s original color and prevent fading or staining.

Cover the tiled surface with protective sheeting or tarps to prevent dust, debris, and heavy equipment from damaging the grout. Avoid dragging heavy objects across the tiles to prevent cracking or chipping of the grout lines.