Walling Solutions

Magicrete Dry Mix Products: Mortars, Plasters & Putty

Magicrete’s Dry Mix Products replace the messy, error-prone practice of mixing raw sand and cement on the job site. Our factory-manufactured, polymer-modified mortars, plasters, and putties arrive in pre-weighed bags—just add water. Engineered for extreme tensile strength and superior water retention, our dry mix solutions guarantee a crack-free, perfectly smooth wall finish while completely eliminating the need for post-application water curing.

The End of On-Site Mixing Chaos

Traditional masonry requires contractors to order truckloads of loose sand and cement, which are manually mixed on the ground. This leads to wildly inconsistent mortar ratios, massive material spillage, and a plaster that is mathematically guaranteed to crack as it dries.

Magicrete Dry Mix products are produced in fully automated plants. We utilize precisely graded aggregates, high-grade cement, and advanced European polymers. This ensures that every single bag delivers the exact same compressive strength and workability, resulting in faster application, zero material waste, and perfectly uniform walls.

The Dry Mix Finishing Matrix

Achieving a flawless wall requires specific chemistry at every layer. Match your finishing phase to our engineered dry mix solutions.

The Polymer Advantage: Why Curing is Obsolete

The greatest logistical headache on a construction site is water curing—spraying water on newly plastered walls for 7 to 14 days to prevent the cement from burning out and cracking.

Magicrete has engineered this problem out of existence. Products like our Block Jointing Mortar and Gypsum Plaster contain advanced water-retention polymers. These chemicals lock the necessary moisture inside the mortar bed, allowing the cement to hydrate and achieve maximum strength entirely on its own. This saves millions of liters of water per project and accelerates the painting and handover schedule by weeks.

Frequently Asked Questions

Q.1. What is the coverage area of Magicrete Block Jointing Mortar?

Ans. Because it is applied as a thin-bed adhesive, it is incredibly efficient. A standard 30 kg bag of Block Jointing Mortar covers approximately 55 to 60 sq. ft. when applied at the recommended 3mm thickness on standard AAC blocks.

Q.2. Why should I use Gypsum Plaster instead of traditional cement plaster for interiors?

Ans. Gypsum plaster is a self-setting, lightweight material that requires only a single coat directly on brick or block walls. It leaves a super-smooth, crack-free finish that is immediately ready for painting, completely bypassing the messy, multi-step process of cement plastering, curing, and puttying.

Q.3. Does Block Jointing Mortar really hold blocks together with just a 3mm joint?

Ans. Yes. Magicrete Block Jointing Mortar relies on high-strength chemical polymers for adhesion, not the mechanical bulk of sand and cement. It achieves a tensile adhesion strength that far exceeds traditional mortar, dramatically increasing the overall load-bearing capacity of the masonry wall.

Q.4. How do I apply Putty Plus Wall Putty?

Ans. Putty Plus is a pre-mixed, white cement-based powder. Simply mix it with clean water to form a smooth paste. Apply it to the plastered wall in two thin, even coats using a putty blade, allowing the first coat to dry before applying the second. It provides a highly durable, bright white base that significantly reduces paint consumption.

Q.5. Can Readymix Plaster be used on exterior walls exposed to rain?

Ans. Yes. Magicrete Readymix Plaster is a robust, polymer-modified cementitious plaster specifically engineered to withstand weathering. It binds powerfully to the substrate, providing an even, highly durable, and crack-resistant surface that protects exterior building facades from the elements.